WFIRO™ Benefits:
- Up to 50% less in the capital part cost over conventional storage and distribution systems.
- Saving in operating costs over typical water purification system.
- Production of both USP “Purified Water” and “WFI” quality water.
- Self- cleaning of organic, inorganic materials and microorganisms from the system.
- Continuous control of microbial growth through entire purification and delivery system.
- Self-sanitization with a benign natural sanitant.
- Self–monitoring without the use of a PLC. A PLC is optional but not required.
- Able to be repaired quickly.
- Pump repair will not affect the microbial integrity of the purification system or the point of use delivery piping system.
- Saves on energy costs since tempered feed water is not required.
- Self-regulation of production rate under various feed temperatures.
- Variable production rate automatically responds to varying draw off rates.
- Simple in design, one device with appropriate pre-treatment.
- Low maintenance.
- Environmentally friendly, no hazardous chemicals used or excess water consumed.
- Automatically goes from Standby (cleaning and recycle mode) to production mode.
- Able to automatically remove high temperature or poor quality water from the system.
- Easily installed.
- Does not require expensive support services, i.e. steam boilers, cooling systems, etc.
- Easily validated in the pharmaceutical industry.
- Energy efficient.
- Adaptable for use on different feed water qualities.
- Built in water recycling to reduce water costs.
- Reduced wastewater costs by incorporating high recovery rates.
- Uses a smaller footprint than conventional systems.
- Simple controls, only requires 2 sensors (1 conductivity/temperature and 1 flow sensor) with 1 low-pressure safety switch for operation.
- Technology design capabilities to produce < 1 to several hundreds of gallons per minute.